| PHOTOCELLS |
 |
ER-REF POLARISED REFLECTION PHOTOCELL FOR GATE AUTOMATION.
1. Rapid to install (wall-mounted or on a supporting column) as it only requires wiring to one side of the gate. The round reflector must be installed on the other side at the same height as the photocell.
2. Extremely reliable, as it is able to detect highly reflecting objects, such as mirrors or shiny surfaces. Alignment of the photocell is very easy: thanks to the analog alignment LED, it is easy to detect the best position.There is an optional guard to protect the reflector against knocks and splashes.
3. Should not be used in exposed environments where frost or dew can affect performance.
|
|
| technical data |
| » POWER SUPPLY (set with a jumper) |
12 Vdc/Vac ; 24 Vdc |
| » MAX ABSORBED POWER |
3 W |
| » MAX RECEIVER RELAY SWITCHING RANGE |
From -25°C to +55°C |
| » ACTIVATION TIME |
+24/12 VDC |
| » MAX WORKING TIME |
250 mA (5 mA in stand-by) |
| » OPERATING TEMPERATURE |
N.O. |
| » RELATIVE HUMIDITY |
Pulse Functioning, from 1 to 10 secs., or Bistable |
| » LIGHT REJECTION |
max. 1 A at 24 Vdc for resistive loads max. 0.5 A at 24 Vdc for non-resistive loads |
| » PROTECTION CLASS |
Clean Contact |
