Aprimatic - THE CHAMPION OF AUTOMATION

T:01376 556010 • F:01376 567874 • E: sales@aprimatic.co.uk

Home > Products > Electronic Devices & Installation Accessories > Access Control

access control - REMOTE CONTROLS AND RADIO RECEIVERS

433.92 MHZ MEMORY SYSTEM
DESCRIPTION
	TR2 - 433.92 MHz twin channel rolling code remote control
	TR4 - 433.92 MHz four channel rolling code remote control
	TR14 - 433.92 MHz 14 channel remote control with function keys that can be customized 62702000 using the Apricot RC Customizer
	RR SR - 433.92 MHz Memory System Unico radio receiver (super reactive version) with built-in antenna.
	RR SE - 433.92 MHz Memory System Unico radio receiver (narrow band super-heterodyne version) with built-in antenna.
	ANT433 - 433.92 MHz antenna with 4.5 m coax cable and earth connection

COMMON ACCESSORIES
DESCRIPTION
	CA41 - Expansion relay module for one extra channel.
	CA43 - Expansion relay module for 3 additional channels
	MM1 - Pull-out memory module for up to 496 codes (standard in Memory System radio receivers).
	MM2 - Optional pull-out memory module for up to 2032 codes.
	CR44 - IP 44 container for external installation.
	SDIN - DIN bar fixing support.

27.195 MHz REMOTE CONTROLS AND RADIO RECEIVERS

2AND 4 KEY DIP-SWITCH REMOTE CONTROLS
practical hole in the case allows you to attach the units to key rings. A function LED lights to confirm transmission of the signal. The range includes the TG2M two channel and TG4M four channel remote controls with an average line of sight range of 50 to 100 m.

RADIO RECEIVERS
Modular RG radio receivers can be expanded up to 4 channels simply by adding CA2 relay expansion cards. Voltage can be selected between 12 Vdc/Vac and 24 Vdc/Vac. The receivers include a robust ABS plastic case on which the antenna can be installed. The plug-in RG1 radio receiver can be installed directly inside Aprimatic control units. The reception channel can be easily selected by means of jumpers. Both radio receivers can be combined with an AFQ 30 pen antenna or an ASQ30 jointed antenna.

DESCRIPTION

CODE

TG2M - 27.195 MHz two channel dip-switch remote control.

6620200000605

TG4M - 27.195 MHz four channel dip-switch remote control.

6620200000606

RG/I - single channel plug-in radio receiver; antenna required.

6620100030002

RG - Modular radio receiver with CA2 card upgradeable to 4 channels; antenna required.

6620100030504

ACCESSORIES
DESCRIPTION	CODE
CA2 – Relay expansion card (pack of 6 pcs).	6610100000011
CA2T - Timed CA2 module.	6610100000038
AFQ30 - 27.195 MHz pen antenna, installable on flasher units, radio receivers and control units (pack of 6 pcs).	6637100000007
ASQ30 - 27.195 MHz jointed antenna for external wall mounting (pack of 6 pcs).	6637100000008

UNICALL

1.  Installed by plugging-in to Aprimatic control units. A special adapter is required for installation on Aprimatic EL324 and T22 model units.

2.  Plug-in Antenna Flex supplied. An optional external antenna is available, recommended for installations where GSM coverage is not guaranteed.

3.  Any SIM card can be used (essential component to be purchased separately).

technical data

» FREQUENCIES

900 MHz and 1800 MHz (dual band)

» ANTENNA

50 OHM

» TEMPERATURE

From -25°C to +55°C

» POWER SUPPLY

+24/12 VDC

» ABSORBED CURRENT

250 mA (5 mA in stand-by)

» CONTACT OUTPUT

N.O.

» OUTPUT FUNCTIONING

pulse functioning, from 1 to 10 secs., or bistable

» OUTPUT CONTACT

max. 1 A at 24 Vdc for resistive loads max. 0.5 A at 24 Vdc for non-resistive loads

» INPUT

clean contact

» CARD DIMENSIONS

78 X 54 X 20 MM

» MEMORY CAPACITY

up to 200 numbers enabled

» PROTECTION CLASS

IP 45

» UNICALL - GSM receiver Module (installed by plugging-in)

65061000

keyboard

CT3: Electronic keypad with stainless steel keys for over 2 billion 6610200030001 possible combinations. Data transmission along a serial cable between the keypad and the decoding card ensures tamper-proof protection.

DECODER

1. DEC/A Decoder card with 256 codes for access control systems. Installed by plugging-in to Aprimatic control units.

2. Compatible with PR5 proximity sensor; with CT3 keypad and with LB4 magnetic card reader. Replaces the previous range of Aprimatic decoders (DC/3 and DB/4).

technical data

» POWER SUPPLY

24 Vdc ± 15%

» NSTALLATION

Plug-in

» NUMBER OF CODES STORED

Plug-in

» CONNECTION TO READER

Bus 2-3 leads

» DIMENSIONS

mm 105x65x30

TAMPER-PROOF KEY SWITCH
DESCRIPTION
	PM 12: Two contact metal key switch for wall or post mounting.
	PC12: Two contact key switch. Accessories are available for recessed post and wall mounting and for external wall and post mounting.

OPTIONAL ACCESSORIES FOR PR5; CT3; LB4; LM1 E PC12
DESCRIPTION	CODE
Plastic container for recessed wall mounting (pack of 6 pcs).	6603200000005
PC12 metal container to be welded.	6603200000001
Metal container for welding (pack of 8 pcs).	6603200000004
Bracket for metal pillar connection complete with screws (pack of 6 pcs).	6603200000007
Galvanised post (height 110 cm).	6603200000003
Post base plate (pack of 4 pcs).	6602200000009

OPTIONAL POWER SUPPLIES
DESCRIPTION
	AL1 12-24 V dc 500 mA power supply for the independent control of electric locks, relays, CT3 keypad or LB4 card reader.
	24 V dc 250 mA power supply for safety devices and accessories 50 mm Ø x 30 mm h. Can be installed in 3 module wall boxes.

Brochure

Technical Data

site by: smartwebdesigns